Drives & Automation – FSC Group

Tellus & V-Server Fuji Electric

admin — Fri, 08 Jul 2022 11:10:56 +0000

Fuji Electrics Ac Drives in Delhi-

In Tellus HMI mode, manage on-site PLC data from the office PC via direct serial connection or Ethernet with PC peripheral equipment and Windows application software.

V Server accesses PLC from the office PC via MONITOUCH through Ethernet to collect real-time data without additional programming. Together, this cost-saving software package enables you to monitor and operate your plant, anywhere, anytime. Onsite Monitouch data can be accessed and used for remote maintenance from your office PC. V-Server enables easy data collection and management of real-time onsite data. Quick recovery of production lines is possible with no extra cost and no loss of time. Real-time monitoring from remote locations and solving problems without visiting the site helps maintain uptime and production.

The post Tellus & V-Server Fuji Electric appeared first on FSC Group.

Monitouch X1

admin — Fri, 08 Jul 2022 11:08:01 +0000

The MONITOUCH X1 (Fuji HMI Operators) Series monitors feature the broad FA and IT connectivity and flexibility to digitize your factory.

It facilitates the implementation of smart factories that effectively utilize data and uses Windows as a gateway from the production sites to the IT systems. Functioning as a link to efficiently communicate between the factory and offices or cloud systems. The X1 series is equipped with OPC UA server and client, so data can be collected by connecting to both offices and production sites. Even if devices at the production site are incompatible with OPC UA, the X1 series can fulfil the role of a gateway to OPC UA in order to transfer data to OPC UA clients in the host system. OPC UA enables data sharing between production sites and the host system, and facilitates the standardization of equipment.

The post Monitouch X1 appeared first on FSC Group.

ALPHA 7 Fuji Electric

admin — Fri, 08 Jul 2022 10:26:13 +0000

With industrial high-tech equipment developing and advancing rapidly, a highly responsive servo system provides reliable high precise performance.

The supremely elaborated control functions turned ALPHA 7 Electric Fuji Drive and automation is one of the fastest and most precise servo systems on the Fuji drive and automation control market. Fuji's proprietary control algorithm achieves a speed and frequency response at 3.2kHz, the highest level in the industry. This reduces the tact time, enabling high-speed control. In certain models, the maximum instantaneous torque of the servo motor is now as high as 350%. The encoder resolution is now as high as 24 bits. ALPHA 7 Electric Fuji Drive and automation provides much higher control precision than before. Standard equipment includes the STO function defined in the international standard IEC61800-5-2. In addition, the WSU-ST1 option adds support for SS1, SLS, SBC, and SSM. These safety functions can be easily configured with parameters. It supports a wide range of monitoring functions and delivers extreme safety at the same time.

The post ALPHA 7 Fuji Electric appeared first on FSC Group.

FRENIC4600 Series Medium-voltage direct output inverters

admin — Fri, 08 Jul 2022 09:54:10 +0000

Frenic 4600 (Fuji Drive and Automation) is a series of environment friendly medium voltage IGBT inverters.

It raises the efficiency and power factor of medium voltage motors by stabilizing motor operations and conserving energy. The multi-phase diode rectifier system reduces harmonics on the power source side. Fuji Electric's unique multi-level PWM control system reduces the switching surge and even standard motors can be operated. It provides a high-power factor (95% or more) on the power source. Output transformers can be eliminated and that improves total efficiency (approx 97%). High reliability is achieved by reducing the number of inverter cells and using a single-phase, 3-level inverter. Sensorless vector control functions ensure stable operations despite load fluctuations. The control device has a 32-bit MPU for quick response and high accuracy

The post FRENIC4600 Series Medium-voltage direct output inverters appeared first on FSC Group.

FRENIC4400 Series Medium-to-large capacity DC link inverters

admin — Fri, 08 Jul 2022 09:52:26 +0000

The Frenic 4400(Fuji Drive and Automation) Series is a Three-level PWM Inverter.

Using three-level pulse-width modulation (PWM) control with output voltage at 800 V AC, a single unit rated capacity of 1200 kVA is achieved and a drastic reduction in the output current harmonics. An Insulated Gate Bipolar Transistor (IGBT) device configuration ensures faster control response, lower power loss and a simplified inverter control circuit. It allows precision control ranging from + or -0.01% to a torque control of + or -5%. Weak field control that constantly monitors magnetic flux makes it possible to ensure smooth high-speed operations. In addition, optional features such as observer control (impact drop compensation, shaft torsional vibration suppression), speed control autotuning, and plant control software (mechanical loss setting, torque forcing fixed position stop control) are available to be built in.

The post FRENIC4400 Series Medium-to-large capacity DC link inverters appeared first on FSC Group.

FRENIC4000 Series Small-to-medium capacity DC link inverters

admin — Fri, 08 Jul 2022 09:49:14 +0000

The Frenic 4000(Fuji Drive and Automation) series helps better load management. With this extensive capacity series available from 10 kVA to 600 kVA, the capacity can easily be selected to match the load.

In addition, by multiplexing the inverters, up to 3600 kVA (600 kVA x 6 inverter units) can be supported. There is no need for separate cooling fans in each unit and one cooling fan for the control panel is enough. High-efficiency plant operations can be achieved by exchanging power energy and regenerative energy with the DC distribution system over a common DC bus. While the control unit is in operation or stopped it is possible to check various data and status conditions, which makes it extremely easy to review the system operating state including safeguard and abnormal conditions with traceback functions available as an option.

The post FRENIC4000 Series Small-to-medium capacity DC link inverters appeared first on FSC Group.

Mega Next G2 Fuji electric

admin — Mon, 04 Jul 2022 11:32:49 +0000

Fuji Drive and Automation- Frenic Mega

In the dynamic world of industrial automation, the Frenic Mega Variable Frequency Drive stands as a testament to precision, power, and innovation. Manufactured by Fuji Electric, the Frenic Mega VFD has become a cornerstone for industries seeking reliable and efficient motor control solutions. With the flexibility and functionality to support a wide range of applications on all types of mechanical equipment, the FRENIC-MEGA (Fuji Drive and Automation) takes core capability, responsiveness, environmental awareness, and easy maintenance to the next level.

The post Mega Next G2 Fuji electric appeared first on FSC Group.

Fuji V9 Series

admin — Thu, 24 Mar 2022 13:05:03 +0000

All types of the V9 series are equipped with VNC server function for remote monitoring and control of production from your tablet PC.

By connecting a PC to a V9 via wireless LAN, screen data can be shared and ladder programs transferred to the PLC (Fuji Drive and Automation). There is no need to physically connect the units and it is easy to debug programs on site. Vertical display and edits on the screen are possible (by left or right turning). Images can be laid out four times the screen size in height or width according to your needs. The displayed image can be magnified up to 200% by pinching out the screen, and reduced to the original size by pinching it in. Operation logs can be searched for by specifying an operator or date and time. The log viewer is simply accessed by selecting it from the drop-down menu. There is no need to create a new display area. Error messages are described in a sentence for easy comprehension.

The post Fuji V9 Series appeared first on FSC Group.

Technoshot Fuji Electric

admin — Thu, 24 Mar 2022 13:05:03 +0000

The Fuji HMI Operators TECHNOSHOT Smart series liquid crystal wide screens are easy to program and have bright TFT color. They are capable of consolidating essential functionality while enhancing operability and visibility.

The screens come in 2 different sizes (7 inches or 10 inches) to fulfil every system need. They can be remotely monitored and operated using the TELLUS application software. Up to 8 types of PLC or other devices of various models from multiple manufacturers can be connected at the same time via both an Ethernet and serial connection. They can be easily set up with the VNC viewer tool on a computer to monitor and operate TS1000 Smart screens on the factory floor via the same computer over Ethernet connection. In addition, monitoring and operations can be easily conducted from a tablet device over wireless router. Through the V-Server, production performance, defects and causes of stoppage data can be collected and stored in the server database from the TS1000 Smart screens.

The post Technoshot Fuji Electric appeared first on FSC Group.

Frenic Mega Fuji electric

admin — Wed, 23 Mar 2022 13:16:03 +0000

Fuji Electric has raised the bar for inverter performance with the Frenic mega Fuji electric variable drive.

Offering expanded power ratings and flexible configurations that support 1/2 HP up to 1,000 HP AC drive/variable frequency drive (VFD) / v/ Hz vector drive applications – these inverters are designed for long lifecycles and improved maintenance functions.

The post Frenic Mega Fuji electric appeared first on FSC Group.