The supremely elaborated control functions turned ALPHA 7 Electric Fuji Drive and automation is one of the fastest and most precise servo systems on the Fuji drive and automation control market. Fuji's proprietary control algorithm achieves a speed and frequency response at 3.2kHz, the highest level in the industry. This reduces the tact time, enabling high-speed control. In certain models, the maximum instantaneous torque of the servo motor is now as high as 350%. The encoder resolution is now as high as 24 bits. ALPHA 7 Electric Fuji Drive and automation provides much higher control precision than before. Standard equipment includes the STO function defined in the international standard IEC61800-5-2. In addition, the WSU-ST1 option adds support for SS1, SLS, SBC, and SSM. These safety functions can be easily configured with parameters. It supports a wide range of monitoring functions and delivers extreme safety at the same time.

Easy adjustments are possible, even for long belt mechanisms, gears with considerable backlash and rack and pinion mechanisms. Motors will run smoothly without oscillating, even with varying rigidity in belt tensions, for example. They have been designed for a long life with ambient conditions of 30 degrees on average, a load factor within 80% and an operation rate of 20 hours a day. Smart design ensures that positioning function is built as standard. No external units or special equipment is required for positioning. It can be used on site, or off site in offices. Test operations like reading, writing, teaching and saving parameters can be carried out easily on site and the data can be checked or edited back at the office.

As the ALPHA5 VV type is the standard model, external positioning unit or dedicated items for positioning are not required. The following operations are enabled by one unit: Positioning via Modbus-RTU communications (immediate value data) Positioning via Di/Do signal (positioning data 15 points*) Controlling positions, speeds and torques via pulse/analog input. Operations such as PTP positioning operation, parameter edit, and various monitoring are enabled. All you need to do is connect HMI (POD), general-purpose PLC, or PC controller directly to servo amplifier via Modbus-RTU communications. It is also compatible with SX bus: VS Type and LS type - A sophisticated motion control system that has synchronization and interpolation controls can be configured easily.